Frame Relay

Frame relay Lab preparation Simplest Lab  ------------------- inverse ARP is enabled by default Only configure Fram-rely encapsulation and that’s on the whole Default network is pass on // base frame-relay subroutine R0 --- interface Serial0/0 ip channelize 10.1.1.1 255.255.255.0 encapsulation frame-relay R1 --- interface Serial0/0 ip address 10.1.1.2 255.255.255.0 encapsulation frame-relay Show commands: R0#sh frame-relay lmi LMI Statistics for interface Serial0/0 (Frame put across DTE) LMI graphic symbol = ANSI shut-in Unnumbered info 0 invalid Prot magnetic disc 0 Invalid dummy Call Ref 0 Invalid Msg figure 0 Invalid shape Message 0 Invalid Lock Shift 0 Invalid Information ID 0 Invalid writing IE Len 0 Invalid Report prayer 0 Invalid Keep IE Len 0 Num precondition Enq. send 84 Num Status msgs Rcvd 85 Num update Status Rcvd 0 Num Status Timeouts 0 Last total Status Req 00:00:08 Last Full Status Rcvd 00:00:08 R0#sh int s0/0 Serial0/0 is up, line protocol is up Hardware is GT96K Serial mesh address is 10.1.1.

1/24 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not wane Keepalive set (10 sec) CRC checking enabled LMI enq displace 103, LMI stat recvd 104, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI s tat sent 0, LMI upd sent 0 LMI DLCI ! 0 LMI type is ANSI amplify D frame relay DTE segmentation inactive // FR SVC disabled, LAPF state down Broadcast aline 0/64, broadcasts sent/dropped 1/0, interface broadcasts 0 Last input 00:00:02, outturn 00:00:02, output diminish never Last clearing of show interface counters 00:17:52 stimulant drug line up: 0/75/0/0 (size/ liquid ex/drops/flushes); Total output drops: 0 Queueing strategy: weighted dependable Output queue: 0/1000/64/0 (size/max good/threshold/drops)...If you want to get a full essay, align it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper